Construction Management BS
Total Units Required: 120
The Bachelor of Science in Construction Management provides a broad base of knowledge and skills targeted toward the management of construction operations. Particular emphasis is on plan reading, project estimating, scheduling, cost control, legal aspects, and construction operations at the project and company level. Courses provide students with simulated management experience utilizing actual contract plans and specifications.
The curriculum is focused on providing students with the skill set comparable to the 17 student learning outcomes prescribed by the program's accrediting body, the American Council for Construction Education (ACCE). To obtain this degree, students complete a blend of selected construction management courses plus an appropriate complement of business, law, math, science, and General Education courses.
Advising Requirement
Advising is mandatory for this program. Consult your department advisor or program coordinator for information.
Laptop Requirement
Students need a laptop for this program. Consult with the department for hardware and software requirements. Discounts are available through the Chico State Wildcat Store.
Grading Requirement
All courses taken to fulfill program course requirements must be taken for a letter grade except those courses specified by the department as credit/no credit grading only.
Some courses require a minimum grade to progress in the program. Minimum grade requirements, including those listed on course requisites, are considered graduation requirements.
The following courses or their equivalents must each be completed with a grade of C- or higher prior to enrollment in any required 300- level Construction Management (CMGT) course: CMGT 100, CMGT 105, CMGT 110, CMGT 135, CMGT 210, and CMGT 235.
Enrollment in any mathematics course requires a grade of C- or higher in all prerequisite courses or their transfer equivalents.
Course Requirements for the Major: 87 units
Completion of the following courses, or their approved transfer equivalents, is required of all candidates for this degree. Courses in this program may complete more than one graduation requirement.
Priority for enrollment in all Construction Management (CMGT) courses will be given to CMGT majors. Construction Management students taking any CMGT course for the first time will be granted priority over CMGT students who are attempting to repeat a course.
| Course | Title | Units |
|---|---|---|
| Lower Division | ||
| ACCT 201 | Introduction to Financial Accounting | 3 |
| ACCT 202 | Introduction to Managerial Accounting | 3 |
| BLAW 203 | Introduction to Business Law | 3 |
| CHEM 107 | General Chemistry for Applied Sciences | 4 |
| CMGT 100 | Concepts of Construction | 3 |
| CMGT 105 | Computer Applications in Construction Management | 3 |
| CMGT 110 | Construction Graphics | 3 |
| CMGT 135 | Construction Materials and Systems | 3 |
| CMGT 210 | Analysis of Construction Drawings and Specifications | 3 |
| CMGT 235 | Electrical and Mechanical Systems | 3 |
| ECON 103 | Principles of Microeconomic Analysis | 3 |
| MATH 120 | Analytic Geometry and Calculus | 4 |
| PHYS 202A | General Physics I | 4 |
| Upper Division | ||
| BCOM 300W | Communication in Business (W) | 3 |
| CMGT 330 | Soil Mechanics, Concrete, and Construction Surveying | 3 |
| CMGT 332 | Construction Method Analysis | 3 |
| CMGT 335 | Construction Equipment | 3 |
| CMGT 350 | Principles of Statics and Strength of Materials | 3 |
| CMGT 360W | Construction Project Management (W) | 3 |
| CMGT 385 | Concepts of Sustainable Construction | 3 |
| CMGT 440 | Temporary Structures | 3 |
| CMGT 450 | Building Estimating | 3 |
| CMGT 455 | Construction Cost Management | 3 |
| CMGT 457 | Project Scheduling and Control | 3 |
| CMGT 458 | Heavy Construction Estimating | 3 |
| CMGT 460W | Legal Aspects of Construction (W) | 3 |
| CMGT 462 | Construction Contracts | 3 |
| MGMT 303 | Survey of Management | 3 |
| Total Units | 87 | |
Honors in the Major
Honors in the Major is a program of independent work in your major. It requires six units of honors coursework completed over two semesters.
The Honors in the Major program allows you to work closely with a faculty mentor in your area of interest on an original performance or research project. This year-long collaboration allows you to work in your field at a professional level and culminates in a public presentation of your work. Students sometimes take their projects beyond the University for submission in professional journals, presentation at conferences, or academic competition. Such experience is valuable for graduate school and professional life. Your honors work will be recognized at your graduation, on your permanent transcripts, and on your diploma. It is often accompanied by letters of commendation from your mentor in the department or the department chair.
Some common features of Honors in the Major program are:
- You must take six units of Honors in the Major coursework. All six units are honors courses (marked by a suffix of H), and at least three of these units are independent study (399H, 499H, 599H) as specified by your department. You must complete each course with a minimum grade of B.
- You must have completed 9 units of upper-division coursework or 21 overall units in your major before you can be admitted to Honors in the Major. Check the requirements for your major carefully, as there may be specific courses that must be included in these units.
- Your cumulative GPA should be at least 3.5 or within the top 5% of majors in your department.
- Your GPA in your major should be at least 3.5 or within the top 5% of majors in your department.
- Most students apply for or are invited to participate in Honors in the Major during the second semester of their junior year. Then they complete the six units of coursework over the two semesters of their senior year.
- Your honors work culminates with a public presentation of your honors project.
Honors in the Major is not part of the Honors Program. Each department administers its own program. Please contact your major department or major advisor to apply.
See Bachelor's Degree Requirements for complete details on general degree requirements. A minimum of 39 units, including those required for the major, must be upper division.
General Education Requirements: 43 units
See General Education and the Class Schedule for the most current information on General Education requirements and course offerings.
This major has approved GE modification(s). See below for information on how to apply these modification(s).
- Take only one course in either Arts (3A) or Humanities (3B). The other is waived.
- CMGT 330 fulfills Upper-Division Physical and Biological Sciences (UD-5).
American Institutions Course Requirements: 6 units
The American Institutions graduation requirement, as mandated in Title 5, Section 40404, requires that students satisfactorily complete courses in United States history, the US Constitution, and government and American ideals (including California state and local government). At Chico State, HIST 130 meets the US history requirement (US-1), and POLS 155 meets the US Constitution and government requirement (US-2) and the California state and local government requirement (US-3). POLS 155 also fulfills three units of GE Area 4, Social and Behavioral Sciences. See Bachelor’s Degree Requirements for more information.
Diversity Course Requirements: 6 units
You must complete a minimum of two courses that focus primarily on cultural diversity. At least one course must be in US Diversity (USD) and at least one in Global Cultures (GC). See Diversity Requirements for a full list of courses. Many courses taken to satisfy these requirements may also apply to General Education.
Upper-Division Writing Requirement
Writing Across the Curriculum (EM 17-009) requires you to take four Writing (W) courses, two of which are upper-division courses designated for your major. Specifically, you must:
- Take one Writing (W) course.
- Take one Graduation Writing Assessment Requirement (GW) course.
- Complete a GE English Composition (1A) course before taking the GW course.
- Earn a grade of C- or higher to receive GW credit.
See Writing and Math Requirements for details on additional writing requirements you need to complete for graduation.
Major-Designated Courses
Writing (W) Course
- CMGT 360W Construction Project Management (W)
GWAR (GW) Course
- CMGT 460W Legal Aspects of Construction (W)
Minimum GPA for Acceptance
For both continuing and transfer students, a minimum cumulative GPA of 2.0 is a prerequisite for being accepted as a construction management major.
Program Learning Outcomes (PLOs) are clear, measurable statements that describe how students demonstrate mastery of the knowledge, skills, and values of the discipline as appropriate to the degree. Graduates of this program are expected to achieve the following PLOs:
- Create written communications appropriate to the construction discipline.
- Create oral presentations appropriate to the construction discipline.
- Create a construction project safety plan.
- Create construction project cost estimates.
- Create construction project schedules.
- Analyze professional decisions based on ethical principles.
- Analyze methods, materials, and equipment used to construct projects.
- Apply electronic-based technology to manage the construction process.
- Apply basic surveying techniques for construction layout and control.
- Understand different methods of project delivery and the roles and responsibilities of all constituencies involved in the design and construction process.
- Understand construction accounting and cost control.
- Understand construction quality assurance and control.
- Understand construction project control processes.
- Understand the legal implications of contract, common, and regulatory law to manage a construction project.
- Understand the basic principles of sustainable construction.
- Understand the basic principles of structural behavior.
- Understand the basic principles of mechanical, electrical, and plumbing systems.